Wooden Driveway Gates Installation Preparation Guide

Before you start erecting your new wooden entrance gate, you must prepare for the installation process or risk damaging the gate or your landscape. When you receive the gate you should thoroughly check it to make sure you receive it in excellent condition. You want to make sure there are no issues with the goods before starting the installation.

After examining the gate for damage driveway gate ideas, you will want to begin aligning the mounting brackets with the structural posts. You should have instructions indicating the specific distance from the center of the mounting bracket screw holes. These must be perfectly aligned so that the gate is not cumbersome to assemble.

After you’ve installed the mounting brackets, you’ll need to double-check that they are properly aligned. This is important before you start installing the gate. With the help of a few people or a tractor, you will need to lift the gate into position to mount it on the brackets. Using heavy duty lag screws, you will need to begin securing the gate to the structural posts.

If your door is equipped with an electric motor, you can start the installation according to the instructions supplied. If you are new to electrical engineering or need to get permits in the area you live in, consider calling an electrical contractor who will help you get the job done.

Leave a Reply