Tplink Range Extender

How To Customize Tplink Range Extender Network By Using Default IP?

The Tplink Extender is a wireless range extender network device. It is the best solution for all routers, cable modems, access points, and other network devices. This wireless extender device completely extends the existing wireless network signals. The Tplink Range Extender device comes along with a dual-band WiFi network. The dual-band network operates a 2.4GHz network & a 5GHz network. It delivers 867 Mbps at 5 GHz and 300 Mbps at the 2.4 GHz band. The MU-MIMO technology is equipped in this network device that simultaneously transfers data to multiple devices for 2× faster performance.

The network coverage is boosted because the four external antennas are equipped with Beamforming technology. Then this technology & antennas absolutely extend and concentrate the Wi-Fi network signals in a quick manner. 

The smart indicator light is available on the front panel of the extender that provides the status of the extender. If you wish to configure the setting to enhance the wireless network signals then you visit 192.168 0.254 and then simply perform all the settings. Additionally, the access point mode is built-in that Supports AP Mode to transform your wired connection into the wireless network.

Why is it important to customize the Tplink Range Extender network signals?

The tp-link wireless dual-band extender device delivers high-speed network signals. You can easily extend the network signals of your standard router by using the network connectivity of this device. But many times, network signals of extender devices become slow due to which the user has to face buffering signals.

If you avoid the weak & interrupted network signals of your range extender device then you should customize the network of this extender device. Customizing the network of the extender device is very important to stabilize the network signals. If you can’t customize the network then the network signals are not enhanced. To properly amplify the network signals you can customize the wireless network signals.

What setting is included in the Tplink Range Extender? 

If you wish to customize the setting of the range extender device then you should know what setting is included in this range extender device. There are some settings included in the extender device. This setting is as presented below:

  • Check internet status
  • Change LAN network setting
  • Configure wireless network
  • Adjust WiFi network coverage
  • Specify DHCP server setting

Customize Tplink Range Extender Network in a simple way

Customizing the network of the range extender device is very easy and you can easily customize it. If you wish to customize the network then you can follow some ways. 

Verify or check the internet status

In the setting of the Tplink Range Extender, you can view or check the internet status. To check the internet status, you visit http://tplinkrepeater.net. Then, you can log in to the account by using the login admin password. After login into the account, you can visit the range extender setting. Under the setting of the extender, you can click the status option. Under the status option, you should verify the extender fails to connect to the host networks.

Please run the Quick Setup again. You can also view, the Tplink Range Extender is connected to the host networks, but there is no transmitting data. Please check the Internet connection of your router. After viewing all the settings, you can click the done option. 

Change LAN network setting

The LAN setting is the most important of the Tplink Range Extender devices. If you wish to boost the network signals then you should customize the LAN setting. You can use the extender’s default IP. Then, you can visit the login page. Under this page, you can log in to the account by using the admin password. You can go to the setting and select the network option. Under this option, you can enable the use of the following IP address.

Then, you can enter the IP address in the IP address field. You can also enter the subnet mask & default gateway in their field. After that, you will find out the save option on the below side. You can click this option and accurately save the setting. 

Configure the wireless network of the Tplink Range Extender 

The wireless network of the Tplink Range Extender is most important. To extend the network coverage & network range you can configure the wireless network. You can go to the setting and select the wireless option. Under this option, you can click connect to the network. Under this page, you can enable a 2.4GHz network. Then, you can click the wireless scanner option. To protect the wireless network you can select the security. After that click the save option and completely save this setting. 

Adjust WiFi network coverage

To adjust the WiFi network coverage, you can visit the setting. To login to the Tplink Range Extender by using the login admin password. You can visit the setting and select the advanced setting. Under the advanced setting, you select the WiFi coverage option. Under the WiFi coverage page, you can select Min, Mid, or Max to adjust your Wi-Fi coverage of the extender. After that, click the save option and accurately save this setting. 

Specify DHCP server setting

To customize the DHCP server setting, you can visit http://tplinkextender.net. Then, you can log in to the account by using the admin password. After that, you can go to the setting and select the network option. Under this option, you can select Auto or On to enable the DHCP Server setting. You can enter the starting and ending IP addresses in the IP Address Pool. In the end, you can click the save option and entirely save this setting. 

What are the trivial steps for the Linksys WiFi router software setup?

One Reply to “How To Customize Tplink Range Extender Network By Using Default IP?”

Comments are closed.