The Dlink DAP 1610 extender is a simple process that helps to boost up the coverage of the extended wireless network connection. It provides a better wifi signal range to all the wifi smart devices. It seamlessly covers the wider area such as offices and the homes as well. You can p[lacce the range extender to rebroadcast the network coverage. It allow you to reach the farthest corners of the preferred areas. The wireless extension can simply access the existing network names and the security keys to control the flexible network connection.
As the d’link wireless extender is a wireless repeater and the access point for a smart home networking connection. The device is compatible with all kinds of wifi routers and ISP gateways. During the dlink wifi extender setup dap 1610, you will go through many steps that also help you to configure the settings of the extender. You can directly plug the extender and enjoy the breakthrough connection in your entire house.
Getting Started with the Configuration of the Dlink DAP 1610 extender
When you start doing the configuration process, then you pass through many steps or methods. It helps to configure the settings of the device in many ways. Well, you can use the WPS PBC method, QRS mobile app, d’link quick setup wizard, or manual configuration of the range extender. Therefore, the dlink wifi range extender also works as an access point mode. Where you can use the device as an access point or the wireless repeater. Let’s begin the configuration of the dlink extender with the WPS-PBC method.
WPS-PBC (Push Button Configuration) Set up of the Dlink DAP 1610 extender
In the WPS-PBC method for the configuration of the extender, it can connect to the extender. Also, connect the access point to increase the network range in your home or office area. Before you begin the configuration of the extender with this method, you need to ensure that the wireless router. Also the access point should support the WPS Button feature. In which you have two simple steps.
In the first step, press the WPS button of the access point or the router. When the LED of the Dlink DAP 1610 extender is blinking amber light. Similarly, push the WPS button of the d’link range extender as well. After that, the LED light flashes the green light that indicates the successful connection between the two devices.
The second step is when the Dlink DAP 1610 extender is ready to share the network connection with other wireless devices. Such as laptops, computers, mobile phones, etc. At that time, you may use the WPS button to extend the network connection. That is created by using the SSID network names. The wireless password is the same as the extended network connection.
Dlink DAP 1610 extender QRS Mobile setup
In this method, you need to install the QRS app on your mobile devices. As the app can also run into laptops and notebooks as well. So after the quick installation of the app from the Google or Apple Play Store, configure the settings of the Dlink DAP 1610 extender. Just connect the wireless router to the device and scan the wifi name that you can find on the displayed list. Hence, enter the wifi password. After that, launch the app on your mobile phone and operate it from the home screen of the device. Then click start to continue the process and follow the on-screen prompts.
Web-based setup
In this method, you simply need the wifi name and the password. That is located on the configuration card of the device. After that, open the internet browser on the client device. Also, enter dlinkap.local, you may also use the default IP address 192.168.0.50 or to access the web page.
It will help you to connect to the host network. After that, log in to the extender with the new IP address. That will assign to you and enter the last four digits of the MAC address. Therefore, the username is admin and it cannot change and you may leave the password field blank. Now you can make configurations to the various settings of the device.
Dlink DAP-1610 Quick Setup Wizard
If you are a new user of the Dlink DAP 1610 extender and it shows you no connection between the devices. Then the setup wizard on the screen will automatically appear. For future reference, you can use the setup wizard by tapping on the uplink router icon.
It specially designs to guide you through a setup process to configure the settings. Now establish a connection to extend the network connection. Directly connect your wireless device and configure the settings. Hence, set a password and a setup wizard is completed.
Final words
The Dlink DAP 1610 extender easily increases the existing network connection in your entire house or office area. It enables high-speed performance with wireless technology. Moreover, we offer you many methods to complete the setup of the d’link range extender. You can use the WPS-PBS method, QRS app, web-based, or setup wizard. To avoid bad or weak internet connectivity, set up the settings of the device in a proper manner.
2 Replies to “Phenomenal Configuration Steps of the Dlink DAP 1610 extender”
Comments are closed.